Suzuki GSX-R1000 Service Manual page 130

• Apply SUZUKI BOND to the mating surface of the middle
crankcase.
~99104-31140: SUZUKI BOND "1207B" (USA)
II(iffiJ
99000-31110: SUZUKI BOND "1215" (Others)
NOTE:
Use of SUZUKI BOND is as follows:
*
Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the crankcases within few minutes.
* Take extreme care not to apply any BOND to the oil hole, oil
groove and bearing.
*
Apply to distorted surfaces as it forms a comparatively thick
film.
ENGINE 3-77
• Tighten the crankcase bolt (9 mm) in ascending order of num-
bers assigned to these bolts. Tighten each bolt a little at a
time to equalize the pressure in the following two steps.
~
Crankcase bolt: (M9)
initial: 18 N·m (1.8 kgf-m, 13.0 Ib-ft)
Final: 50 0