Suzuki GSX-R1000 Service Manual page 124

_ Thrust bearing selection table
ENGINE 3·71
Clearance before
Color Thrust bearing
inserting left-side
Thrust clearance
thrust bearing
(Part No.) thickness
2.570 - 2.590 mm
8rown 2.480 - 2.500 mm 0.070 - 0.110 mm
(0.1012 - 0.1020 in) (12228-48800-080) (0.0976 - 0.0984 in) (0.0028 - 0.0043 in)
2.550 - 2.570 mm Red 2.460 - 2.480 mm 0.070 - 0.110 mm
(0.1004 - 0.1012 in) (12228-48800-0CO) (0.0969 - 0.0976 in) (0.0028 - 0.0043 in)
2.530 - 2.550 mm Yellow 2.440 - 2.460 mm 0.070 - 0.110 mm
(0.0996 - 0.1004 in)
(12228-48800-000) (0.0961 - 0.0969 in) (0.0028 - 0.0043 in)
2.510 - 2.530 mm
Green 2.420 - 2.440 mm 0.070 - 0.110 mm
(0.0988 - 0.0996 in)
(12228-48800-0EO) (0.0953 - 0.0961 in) (0.0028 - 0.0043 in)
2.490 - 2.510 mm 81ue 2.400 - 2.420 mm 0.070 - 0.110 mm
(0.0980 - 0.0988 in) (12228-48800-0FO) (0.0945 - 0.0953 in) (0.0028 - 0.0043 in)
2.470 - 2.490 mm Orange 2.380 - 2.400 mm 0.070 - 0.110 mm
(0.0972 - 0.0980 in) (12228-48800-0GO) (0.0937 - 0.0945 in) (0.0028 - 0.0043 in)
2.440 - 2.470 mm 81ack 2.360 - 2.380 mm 0.060 - 0.110 mm
(0.0961 - 0.0972 in) (12228-48800-0HO) (0.0929 - 0.0937 in) (0.0024 - 0.0043 in)
• After selecting a left-side thrust bearing, insert it and again
perform the thrust clearance measurement to make sure it
falls within the standard range.
NOTE:
Right-side thrust bearing has the same specification as the
GREEN (12228-48800-0EO) of left-side thrust bearing.
/ Color code