Excva(Exhaust Control Valve Actuator) And Excv; Excva Removal - Suzuki GSX-R1000 Service Manual

6-4 EXHAUST SYSTEM
Before removing the EXCVA, be sure to set the EXCVA
pulley to the adjustment position.
EXCVA(EXHAUST CONTROL VALVE ACTUATOR) AND EXCV
(EXHAUST CONTROL VALVE)
EXCVA REMOVAL
• Turn the ignition switch OFF.
• Remove the front and rear seats.
• Remove the fuel tank. (c::::rS-S)
• Connect the special tool (Mode select switch) to the dealer
mode coupler. (c::::r4-16)
• After turning the special tool's switch ON, turn the ignition
switch ON.
'TImt,
09930-82720: Mode select switch
• Check the cable slots
®
of the EXCVA pulley face upward
(adjustment position) as shown.
• Turn the ignition switch OFF.
I
CAUTION
I
• Remove the EXCVA mounting bolts.
• Hold the EXCVA pulley with an adjustable wrench, and
loosen the pulley mounting bolt.
I
CAUTION
I
*
When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
*
Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.