Suzuki GSX-R1000 Service Manual page 139

3·86 ENGINE
• Install the generator rotor onto the crankshaft.
• Install the rotor bolt with the washer.
• Hold the generator rotor with the special tool and tighten its
bolt to the specified torque.
,rodt,
09930-44520: Rotor holder
~ Generator rotor bolt: 120 N·m (12.0 kgf-m, 88.5 Ib-ft)
GENERATOR COVER
• Apply SUZUKI BOND lightly to the mating surfaces at the
parting line between the upper and lower crankcases as
shown.
•
1207~ 99104-31140: SUZUKI BOND "1207B" (USA)
99000-31140: SUZUKI BOND "1207B" (Others)
• Install the dowel pins
CD
and new gasket (2).
I
CAUTION
I
Use the new gaskets to prevent oil leakage.
• Install the generator cover and tighten the generator cover
bolts to the specified torque.
~ Generator cover bolt: 10 N·m (1.0 kgf-m, 7.0 Ib-ft)
A.
WARNING
Be careful not to pinch the finger between the genera-
tor cover and the crankcase.
NOTE:
Fit the gasket washer to the bolts
®.
• Install the CKP sensor @.