Suzuki GSX-R1000 Service Manual page 156

• Tighten the valve timing inspection plug (f) to the specified
torque.
~ Valve timing inspection plug: 11 N·m (1.1 kgf-m, 8.0 Ib-ft)
CYLINDER HEAD COVER
• Pour engine oil in each oil pocket in the cylinder head.
NOTE:
Be sure to check the valve clearance. rc::=r2-8)
• Install the dowel pins.
• Install the a-rings.
• Install the new gaskets to the cylinder head cover.
• Apply SUZUKI BOND to the cam end caps of the gaskets as
shown.
~99104-31140: SUZUKI BOND "1207B" (USA)
99000-31140: SUZUKI BOND "1207B" (Others)
I-C-A-UT-I-O-N
I
Use the new gaskets to prevent oil leakage.
• Place the cylinder head cover on the cylinder head.
• Fit the new gaskets to each head cover bolt.
!CAUTION!
Use the new gaskets to prevent oil leakage.
! -- •
Tighten the head cover bolts to the specified torque.
~ Head cover bolt: 14 N·m (1.4 kgf-m, 10.0 Ib-ft)
ENGINE 3·103