3·76
ENGINE
• Insert the right and left-thrust bearings with oil groove
®
fac-
ing the crank web.
NOTE:
Right-thrust bearing has green painting.
BALANCERSHAFT
• Install the thrust washers
CD, CZl
and oil seal @.
• Apply MOLYBDENUM OIL SOLUTION to each balancershaft
journal lightly.
""if
MOLYBDENUM OIL SOLUTION
• Set the balancershaft so that its punch mark
®
is aligned with
the index
®
on crankshaft.
CRANKCASE
• Clean the mating surfaces of the crankcases.
• Install the dowel pins
CD
and O-ring
CZl
to the upper crank-
case.