Pan Name; Output Group Select; Random Pitch - Yamaha SY77 Operating Manual

COMMON DATA / ELEMENT DYNAMIC PAN
Summary: Specify a ten-character name for the
internal Pan data memory being edited.
Procedure:
From: Dynamic Pan Edit job directory
Select: 03:Pan Name
Specify: a name for the pan memory
COMMON DATA
Summary: Specify the output group for each
element.
Procedure:
From: voice common job directory (JUMP #201)
Select: job 07:OutSel
Specify: the output group for each element
Element 1-4 (off, grp1, grp2, both): Each of the
elements in a voice is independently panned by a
COMMON DATA
Summary: Specify the amount of random pitch varia-
tion for the voice.
Procedure:
From: voice common job directory (JUMP #201)
Select: job 08:Random
Specify: the amount of random pitch variation

6.3 Pan name

7. Output group select

(JUMP #208)

8. Random pitch

(JUMP #209)
Enter a ten-character name for the Pan data.
To clear the currently entered name press F1
(Clr).
To switch to upper-case characters press F2
(Uppr).
To switch to lower-case characters press F3
(Lowr).
Methods of entering character data are ex-
plained in Introducing the SY77, How to use the
numeric key pad, on page 00.
dynamic pan memory, and the stereo signal for
each element is. sent to the DSP effect units via
Output Group 1 and/or 2. The selected Output
Group(s) will determine how each element is
processed through the effects units. (Refer to
Voice Common data job 10.1 Effect Mode for
details.) If output group is turned off, that ele-
ment will not be heard.
VOICE EDIT MODE
JUMP #208
JUMP #209
99