How To Move Around: The Jump Function - Yamaha SY77 Operating Manual

How to move around: the jump function

If you already know the exact function you need to use, it is possible to Jump directly to a specific page
number instead of working your way through the job directories. The jump function also allows you to
repeatedly jump back and forth between two jobs.
Jump to a specified page
Jump between two
marked pages
26
If you need to move to a distant job, it may sometimes be necessary to press
several times, and then move down through two or more job directories. In
EXIT
such cases, it is much faster to jump directly to a specific page.
You may have noticed that most page displays have a unique three-digit
number in the upper right corner. This is the Display Page number. For example,
"Multi edit 2. Multi Volume" is page #402. If you frequently need to adjust the
settings of this page, remember this page number. Then, no matter where you
are, you can press JUMP, 4, 0, 2, and
1. Press
JUMP.
2. Enter the three digit page number.
3. Press and you will jump to the specified page.
ENTER
While you are becoming familiar with the SY77 it will probably be easier for you
to select the desired page while viewing a page directory. However as you gain
more experience, you may find it convenient to use the
to frequently-used pages.
It often happens that you will need to repeatedly make adjustments in two
different pages, which may be widely separated. The jump/mark function allows
you to jump back and forth between two pages.
Suppose you are in song edit job directory, and need to adjust the volume
levels of the voices in the multi.
to jump instantly to that page.
ENTER
JUMP
key to go directly