How To Load And Play The Disk Demo Songs - Yamaha SY77 Operating Manual

How to load and play the disk demo songs

The disk included with the SY77 contains demo songs which take advantage of its capabilities. Here's how
to load and play the songs.
Load the demo song data
from disk
6
Press and then press
1.
UTILITY,
have been editing voice or multi data, the top line of the LCD will blink
"AUTO-STORE". For details on Auto-Store, refer to page 63.)
2. Insert the demo disk into the disk drive, with the metal shutter going in first
and the label facing up. Push it gently in until it clicks into position.
3. Press once to move the cursor to 02:Load From Disk, and press
get the following display.
4. With the cursor located at 01:All Data, press
following. (The filenames will be different.)
5. Move the cursor to select the song you wish to hear, and press
display will ask "Are you sure". Press
the song data from disk. Loading song data from disk will erase any song
data which was previously in the SY77 sequencer memory.
6. While the data is being read from disk, the bottom line of the LCD will show
"Now executing", and "Completed!" when the data has been completely
read.
(Disk) to get the following display. (If you
F4
to get a display like the
ENTER
if you are sure you want to load
YES
to
ENTER
(Go). The
F8