Voice Select - Yamaha SY77 Operating Manual

MULTI EDIT MODE
Pressing F1-F8 will select the corresponding job
1-8. Holding SHIFT and pressing F7 or F8 will
select job 15 or 16.
01: Voice (Voice Select): A multi consist of six-
teen voices which are controlled by MIDI
channels 1-16. A different voice can be
selected for each of the sixteen channels in
the multi.
02: Volume (Voice Volume): The volume of the
voice played by each channel of the multi can
be adjusted.
03: Tuning (Voice Tuning): The fine tuning of the
voice played by each channel of the multi can
be adjusted in steps of 1.1718875 cents.
04: Shift (Voice Note Shift): The pitch of the
voice played by each channel of the multi can
be adjusted in half steps.
05: St-Pan (Voice Static Pan): A fixed stereo
position can be specified for the voice played
Summary: A multi consists of sixteen voices which
are controlled by MIDI channels 1-16. A differ-
ent voice can be selected for each of the sixteen
channels in the multi.
Procedure:
From: multi job directory
Select: job 01:Voice
Specify: the voice for each channel of the multi
This displays the number and name of the multi
you are editing.
This displays the number and name of the voice
where the cursor is located.
Move the cursor in this area and select a voice
for each of the sixteen channels in the multi. This
area displays only the first seven characters of
the selected voice name, but the voice number
and name are fully displayed in
of the multi can use any voice from internal, card,
162

1. Voice select

(JUMP #400)
(JUMP #401)
Each channel
by each channel of the multi, or a voice can
use its own pan settings.
06: OutSel (Voice Output Select): All voices
played by the multi are sent from output
groups 1 and/or 2 to the effect unit. The
selected output group determines how the
voice will be processed through the effect
unit.
07: Effect (Effect Set): The four effects in the
effect unit can be arranged in various ways
to add modulation and reverb to the sound.
08: Name (Name Multi): The multi being edited
can be given a twenty-character name. In
multi play mode this name will be displayed
in large characters.
15: Initlz (Initialize Multi): The multi data being
edited can be initialized to a set of standard
values.
16: Recall (Recall Multi): The previously edited
Multi data can be recalled for additional
editing.
or preset memories, or can be set to an "off
voice. See Off Voice below for details.
A multi in card memory can use only card or
preset voices. A multi in internal memory can
use only internal or preset voices.
If a selected voice contains an AWM ele-
ment which uses card waveform data, and if the
correct card is not inserted into the WAVEFORM
slot, a x mark will be displayed instead of the
number 1-16, and that voice will not sound.
(Each AWM waveform card has a unique ID
number which is stored as part of the data for an
AWM element.)
To edit the voice selected by the cursor, press F8
(Edit). You will enter voice edit mode. Details
are the same as explained in Voice edit mode,
but when you press EXIT to exit voice edit mode
you will return to this Multi edit 1. Voice select
job. However you will not be able to edit effect
settings of the voice, and depending on the
Voice static Pan setting of the multi, modifying
the output select settings or dynamic pan
settings of the voice may have no effect.