Voice Name; Voice Recall - Yamaha SY55 Product Manual

Summary: Assigns a name of up to 10 characters to
the current voice.
Settings: The following characters are available for
use in voice names:
Procedure: Use the
place the underline cursor under the character to
be changed. Use the [DATA ENTRY] control or
[+1/YES] and [-1/NO] keys to select the desired
Summary: Recalls the last voice edited from the
SY55 edit buffer.
Settings: None
Procedure: After selecting the "VOICE Edit Re-
call" display, press the [ENTER] key. "Sure?"
will appear on the upper line of the display.
Press the [+1/YES] to initialize or [-1/NO] to
cancel the initialize operation.
"Completed!" will appear briefly when the
recall operation is finished.

VOICE NAME

cursor keys to
and

VOICE RECALL

character. Continue until the entire voice name
has been programmed.
Details: It's a good ideas to give your voices names
that make the voice easily identifiable. If you've
created a new voice that combines piano and
organ waves, for example, you could call it
something like "PianOrgan".
Refer to: Tutorial, page 46.
Details: Even if you've exited the voice edit mode
and called a different voice, this function will
recall the last voice edited with all parameters as
they were at the time the voice edit mode was
exited.
Please note, however, that a compare opera-
tion overwrites the recall buffer with the con-
tents of the edit buffer at that time. A recall
operation following a compare operation will
therefore recall the contents of the edit buffer at
the time of the compare operation.
Refer to: Tutorial, page 47.
VOICE EDIT MODE
JOB 40
JOB 41
89