Copy Voice; Controller View - Yamaha SY77 Operating Manual

Pressing (01)-(08) will select a voice 1-8
F1-F8
from the displayed voice bank. Holding
pressing (09)-(16) will select a voice 9-
F1-F8
16 from the displayed voice bank.
Summary: Anytime in voice play mode you can copy
the currently selected voice to another voice
memory.
Procedure:
From: voice play mode
Press: COPY
Specify: the destination to which the voice will
be copied.
To execute: the copy operation press
To quit: without executing press
Summary: This function allows you to view the
controller assignments for the voice as a re-
minder of how the voice can be controlled.
Procedure:
From: voice play
Select:
(Ctrl)
F7
To quit: and return to voice play mode press
EXIT.
Parameter: The left side of each column displays
the parameter which is being controlled. The
actual effect that a controller will have on the
parameter to which it is assigned will depend on
and
SHIFT

Copy voice

(JUMP #100)
(Go).
F8
EXIT.

Controller view

(JUMP #100)
(JUMP #102)
To return to the voice play display with the single
voice name displayed in large characters press
The names of the sixteen voices in the currently
selected bank of Internal or Card memory are dis-
played as explained in Voice Directory. Press
or , press a bank button
INTERNAL CARD
press a memory select button 1-16 to specify the
copy destination.
After specifying the copy destination press
(Go). You will be asked "Are you sure?" If you are
sure you want to copy the voice, press
data will be copied. To quit without copying press
NO .
the depth that is specified for each controller
assignment as explained in Voice Common job
12. Controller.
Controller: The right side of each column dis-
plays the controller which is assigned to control
each parameter. The range is not displayed. "-"
will be displayed to indicate a controller which
the SY77 itself does not have, or to indicate that
the parameter's depth has been set in such a
way that the controller has no effect. (Refer to
Voice Common, Controller Set.)
Pitch Bend Range: This area shows the range
over which the
PITCH
the pitch, and the maximum pitch change that
will result when you press down on the key-
board after playing a note (After-touch).
This function allows you to only view the controller
assignments. To edit them, refer to Voice Common
job 12. Controller.
VOICE PLAY MODE
EXIT.
- , and
A D
and the
YES
JUMP #102
wheel can raise or lower
F8
85