Yamaha SY77 Operating Manual page 49

Make effect settings for
the multi
Other settings in multi edit
mode
Save the newly created
multi
Press (07) to select 07:Effect from the Multi Edit job directory and then press
F7
F1 to select 01:Effect Mode Select (or
tings the effect mode will be off. Press
Press three times to get the Reverb Effect 1 set display. With the initial
PAGE
settings the Reverb Effect 1 will be 00:Through. Press
01:Rev.Hall.
Press twice to return to the Multi Edit job directory.
EXIT
To keep this example simple, we will leave the rest of the multi settings at their
initial values. After completing this tutorial, you can read about Multi edit in the
Reference section to learn more about a multi.
From the Multi Edit job directory press
the top line of the display will blink "Auto-store multi".
Press (Go) and the multi will be stored into the currently selected multi
F8
memory. Or, if you want to keep the previous data of that multi, use the memory
select buttons 1-16 to specify a different memory before you press
The bottom line of the display will ask "Are you sure?'. Press
the newly edited multi will be stored, and you will return to multi play mode.
to page #413). With the initial set-
JUMP
to select effect mode 1.
+1/YES
+1/YES
. Since you have modified the data,
EXIT
to select
(Go).
F8
and
+1/YES
37