Eg (Each Operator) - Yamaha SY77 Operating Manual

AFM ELEMENT DATA
3. (F1) AFM operator EG (Each operator)
Summary: Make EG settings for a single operator
while viewing a graphic display of the operator
envelope.
Procedure:
From: AFM Element job
directory
Select: job 03:EG and press F1 (Each)
EG rates press F3 (Rate)
EG levels press F4 (Lvl)
Specify: envelope parameters for the selected
operator
(JUMP #230)
(JUMP#236)
(JUMP#237)
The number of the currently selected operator is
displayed. To move to another operator, use the
OPERATOR SELECT buttons OP1...OP6.
This indicates the time range of the EG graphic
display. A range of "x1" shows the shortest
time and gives the greatest detail. To change the
range, hold SHIFT and press F1-F6 (x1, x2, x5,
x10,x20,x50).
This indicates the segment from which the EG
graphic display begins. To shift the display to a
different segment, hold SHIFT and press F7 or F8
to select Seg0-Seg4 or Rel1.
VOICE EDIT MODE
JUMP #236
123