3: Pan - Yamaha SY85 Owner's Manual

duced by placing the output from different layers at different locations in the stereo
sound field. The parameters in this screen determine the position in the stereo sound
field in which the sound from each active layer will be heard (left to right).
Pan
16
PERFORMANCE EDIT MODE /
In multi-layer performance combinations, interesting stereo effects can be pro-
The name of the currently selected voice/layer is shown in the upper right
corner of the display. The characters "ABCD" to the right of the voice name
indicate the status of each voice: a capital letter if the voice is on, a lower-case
letter if the voice is muted, and a dash if the voice is off.
Range: -31 ... +31
Controls: [CS2], [CS4], [CS6], [CS8], [-1] [+1], Dial
Use the [CS2], [CS4], [CS6], and [CS8] sliders to adjust the pan positions
of the A, B, C, and D layer voices, respectively. Minus values represent pan-
ning to the left, and positive values represent panning to the right. "0" posi-
tions the sound of the selected layer in the center of the stereo sound field.
Voices that are turned off are indicated by "---" on the display. The upper line
of the display also shows a graphic representation of the stereo sound field
with "L" representing "left" and "R" representing "right." As you change the
pan value the vertical bar will appear at the corresponding position on the
graphic display.
1:Layer

3: PAN