Recall Multi - Yamaha SY77 Operating Manual

This function sets all multi data values to the mini-
mum or simplest possible setting. When you are
creating a new multi it is often convenient to start
with the initial settings.
If you are sure you want to initialize the multi
data, press YES and the data of the multi being
edited will be set to the values shown below. If you
decide not to initialize, press NO.
Initialized settings for Multi data
01 Voice select
Preset 1 A0l(0l) GrandPiano (all channels)
02 Voice volume
Volume =127 (maximum) (all channels)
Summary: The previously edited Multi data can be
recalled for additional editing.
Procedure:
From: multi job directory
Select: job 16:Recall
To execute: the recall operation press YES.
To quit: without executing press NO or EXIT.
03 Voice tuning
04 Voice note shift
05 Voice static pan
06 Voice output group select
07 Effect set
08 Name multi

16. Recall multi

If after editing a multi you exit multi edit mode with-
out storing, the edited multi data will be lost. In
such cases, you can use this function to recall the
(JUMP #400) previously edited multi data into the editing buffer.
the previously edited multi data will be recalled into
the editing buffer. If you decide not to recall, press
NO.
Tuning = ±0 (all channels)
Note Shift = ±0 (all channels)
Pan = ±0 (= center) (all channels)
Output = both (all channels)
*** same as for normal voice ***
Name = INIT MULTI VOICE
If you are sure you want to recall, press YES and
MULTI EDIT MODE
167