Element On/Off; Element Select - Yamaha SY77 Operating Manual

VOICE EDIT MODE
When editing a voice which uses two or more ele-
ments, it is often useful to hear only the element be-
ing edited. At any time while editing a normal voice,
pressing the ELEMENT ON/OFF buttons located at
the upper right of the front panel will turn individual
elements off/on. When editing voice common data,
the number and type of elements used by the voice
will be shown in the upper right of the display.
Elements that are on will be displayed in inverse. In
addition the LEDs above the ELEMENT ON/OFF
buttons will light if the element is on and be
darkened when the element is turned off. In the
following LCD, element 2 has been turned off, and
will not be heard.
At any time while editing the element data of a nor-
mal voice, you can use the ELEMENT SELECT but-
tons located at the upper right of the front panel to
select an element to edit. This is often faster than
returning to the top level of voice edit mode and
pressing F3-F6 to select the job directory of a dif-
ferent element.
90

Element on/off

When editing Drum Set data the ELEMENT ON/OFF
buttons will have no effect.
When you move to the Voice Mode Select dis-
play, the element on/off settings will automatically
be cancelled.

Element select

When editing Voice Common data or Drum Set
data the ELEMENT SELECT buttons will have no
effect.