Voice Note Shift; Voice Static Pan - Yamaha SY77 Operating Manual

MULTI EDIT MODE
Selected Voice: This displays the number and
name of the voice played by the multi channel
where the cursor is located.
Voice Tuning (-63...+63 in steps of 1.1718875
cents): Set the tuning for each voice played by
the sixteen channels of the multi. The tuning for
each voice is displayed as a horizontal bar
graph.
Summary: Adjust the note shift (transposition) of
the voice played by each channel of the multi.
Procedure:
From: multi job directory
Select: job 04:Shift
Specify: the note shift for each channel
for channels 1-8 press
Fl (1-8)
for channels 9-16 press
F2 (9-16)
Summary: Specify the stereo position for the voice
played by each channel of the multi.
Procedure:
From: multi job directory
Select: job 05:St-Pan
Specify: the static pan position for each channel
for channels 1-8 press
Fl (1-8)
for channels 9-16 press
F2 (9-16)
164
Note: The actual pitch at which a voice will sound, is

4. Voice note shift

(JUMP #400)
(JUMP #406)
(JUMP #407)
Note: This setting determines how note numbers

5. Voice static pan

(JUMP #400)
(JUMP #408)
(JUMP #409)
Holding SHIFT and pressing F1-F8 will move the
cursor to voices 1-8 or to voices 9-16, depend-
ing on whether F1 or F2 has been pressed.
affected by many other factors; System utility
settings 1. Master tuning. Voice common data
2. Element detune, 3. Element note shift,
11. Micro tuning, AFM element data 2.AFM
oscillator, 7. AFM pitch EG, and AWM element
data 1. AWM waveform set, 6. AWM pitch EG.
Selected Voice: This displays the number and
name of the voice played by the multi channel
where the cursor is located.
Voice Note Shift (-64...+63 in half steps): Set
the note shift (transposition) for each voice
played by the sixteen channels of the multi. The
note shift setting for each voice is displayed as a
horizontal bar graph.
Holding SHIFT and pressing F1-F8 will move the
cursor to voices 1-8 or to voices 9-16, depend-
ing on whether F1 or F2 has been pressed.
received from the keyboard or MIDI IN are
sounded, and has no effect on the data trans-
mitted from MIDI OUT.
Selected Voice: This displays the number and
name of the voice played by the multi channel
where the cursor is located.
JUMP #405