Dynamic Pan Edit - Yamaha SY77 Operating Manual

VOICE EDIT MODE
Preset Dynamic Pan data
# Name Description
1 Center fixed at center
2 Right 6 fixed full right
3 Right 5
4 Right 4
5 Right 3
6 Right 2
7
Right 1 fixed slightly right
8 Left 6 fixed full left
9
Left 5
10 Left 4
11
Left 3
12 Left 2
13
Left1 fixed slightly left
14 L>R slow slowly move L—>R
15 L>R move L—>R
16 L>Rfast
quickly move L—>R
17 R>L slow slowly move R—>L
18 R>L move R—>L
19 R>L fast quickly move R—>L
20 C>R slow slowly move C—>R
21
C>R move C—>R
22 C>R fast quickly move C—>R
23
C—>R slow pause at center then slowly move C—>R
24 C—>R pause at center then move C—>R
25 C—>R fast pause at center then quickly move C—>R
26
C>L slow slowly move C—>L
27 C>L move C—>L
28
C>L fast quickly move C—>L
29 C—>L slow pause at center then slowly move C—>L
30 C—>L pause at center then move C—>L
31 C—>L fast pause at center then quickly move C—>L
32
L<>R slow start at L then slowly move between LR
33 L<>R
start at L then move between LR
34
L<>R narrow start at L then move (narrowly) between
LR
35 L<>R fast start at L then move quickly between LR
36 R<>L slow
start at R then slowly move between RL
COMMON DATA / ELEMENT DYNAMIC PAN
Summary: This function allows you to edit the
currently selected Dynamic Pan data.
Procedure:
From: Voice Common job 06.ElemPan
When: an Internal dynamic pan memory is
selected
Press: F8 (Edit)
Select: the Dynamic Pan parameter you wish to
edit
Editing is possible only when an Internal pan
memory is selected. If you want to edit one of the
preset pan memories, press COPY to copy it to an
Internal pan memory as explained in the following
section 6.0.1 Copy Pan Data.
96

6.0 Dynamic pan edit

(JUMP #207)
# Name Description
37 R<>L start at R then move between RL
38 R<>L narrow start at R then move narrowly betweenRL
39 R<>L fast start at R then move quickly between RL
40 C>R<>L slw start at C then move slowly between RL
41 C>R<>L s&n start at C then move slowly and narrowly
between RL
42
C>R<>L start at C then move between RL
43 C>R<>Lfst start at C then move quickly between RL
44 C—>R<>L sl pause at C then move slowly between RL
45
C—>R<>L pause at C then move between RL
46 C—>R<>L fs pause at C then move quickly between
RL
47 C>L<>R slw start at C then move slowly between LR
48
C>L<>R s&n start at C then move slowly and narrowly
between LR
49 C>L<>R
start at C then move between LR
50 C>L<>R fst start at C then move quickly between LR
51 C—>L<>R sl pause at C then move slowly between LR
52 C—>L<>R pause at C then move between LR
53 C—>L<>R fs pause at C then move quickly between
LR
54 LFO MWheel
controller regulates the width (initially 0)
of LFO panning
55 LFO wide broad panning by LFO
56
Note wide broad panning by note number
57 Note narrw narrow panning by note number
58 Notew+EG n broad panning by note number + narrow
LR movement
59 Noten+EG w narrow panning by note number + broad
LR movement
60 Vel wide broad panning by key velocity
61
Vel narrow narrow panning by key velocity
62
Vel w+EG n broad panning by key velocity + narrow
LR movement
63 R&L1 variation of repeated LR movement
64 R&L2 variation of repeated LR movement
The name and number of the currently selected
Dynamic Pan data are displayed.
Move the cursor in this area to select a job.
01: Pan Source: Select a control source
(velocity, note number, or LFO) to affect
dynamic panning. (See 6.1 Pan Source)
02: Pan EG: Set the panning EG. (See 6.2 Pan
EG)
03: Pan Name: Assign a ten-character name to
the pan data. (See 6.3 Pan Name)
Pressing F1-F3 will select the corresponding job.