Using A Song Edit Job - Yamaha SY77 Operating Manual

Song edit jobs allow you to make overall changes in specified measures of a track, and to copy, erase,
delete, insert, or apply other operations to entire measures
When to use a song edit
job
Select the song edit job
Set parameters and
execute the job
48

Using a song edit job

As explained in the previous section, song edit mode allows you to modify,
insert, or delete individual events of tracks 1-15. This gives you very precise
control over individual data events, but it is often useful to use a Song Edit Job
to make overall changes that apply to all the data in one or more entire
measures.
Sixteen different song edit jobs are provided, allowing you to modify the data
of specified measures in various ways. You can also copy, erase, delete, insert,
etc. entire measures. In this example, we will use a song edit job to transpose
the notes in measures 17-32 of track 3 an octave up.
From the song play display, press
Press (05) to select the 05:Transps (transpose) job.
F5
Now we will specify the track to be affected, the area of measures, and the
amount by which the data will be transposed.
1. Press memory select button 3 to select track 3.
2. Set the Top Measure =017 and the Last Measure =032.
3. Set the Interval =+12 (one octave up).
After setting the parameters, press
"Are you sure ?". Press
Press twice to leave song edit mode and return to song play mode.
EXIT
Press to playback the song, and notice that measures 17-32 of track 3
RUN
play an octave higher than measures 1-16.
(Job) to get the Song Edit Job display.
F6
. The bottom line of the LCD will ask
ENTER
and the job will be executed.
+1 /YES