Pattern Edit - Yamaha SY77 Operating Manual

Summary: This is where you edit individual events
that have been recorded in a pattern.
Procedure:
From: pattern play or pattern record mode
Press: EDIT.
To exit: edit mode and return to pattern play mode
press EXIT.
The pattern edit display will differ according to
whether graph or data editing has been selected.
Pattern graph editing: To select graphic editing
press F7 (Grap). The display will show a hori-
zontal bar to indicate the position in the mea-
sure, and a keyboard diagram to indicate the
notes that have been recorded at each step.
Pattern graph editing is exactly the same as
song graph editing, except that the pattern num-
ber is displayed instead of the song name, and
that the maximum measure number is 32 instead
of 999. For details, please refer to Song edit
(graph) on page 179.

Pattern edit

Pattern data editing: To select data editing press
F8 (Data). The display will show the type and
numerical values for each event. Data editing is
divided into two modes; graph mode and data
mode. In data mode you can either Change or
Insert data. When you enter data mode, change
will automatically selected.
Pattern data editing is exactly the same as song
data editing, except that the pattern number is
displayed instead of the song name, and that the
maximum measure number is 32 instead of 999.
For details, please refer to Song edit (data
insert) on page 181 or Song edit (data change) on
page 180.
PATTERN MODE
209