Operator On/Off; Afm Algorithm; Copy Element - Yamaha SY77 Operating Manual

AFM ELEMENT DATA
Summary: Any time while editing an AFM element,
you can turn the output of each operator off/on.
This is useful when you want to hear how each
operator affects the others, or when you want to
hear only certain operators.
Procedure:
From: any job in the AFM job directory
Press: the OPERATOR ON/OFF buttons (memory
select buttons 9-14) to turn operators 1-
6 on/off.
The on/off condition of each operator is shown in the
upper right of the LCD when editing an AFM ele-
ment, and also indicated by the OPERATOR ON/OFF
LEDs. Operators that are on are displayed in
inverse. In the following LCD all operators are on.
AFM ELEMENT DATA
Summary: You can view a graphic display of the
current algorithm at any time while editing an
AFM element and select a different algorithm if
you wish. Since the algorithm determines how
each operator functions, you should always be
aware of the algorithm when editing AFM
operator data.
Procedure:
From: any job in the AFM
job directory
Press: F8 (Alg)
To exit: to the previous editing job press EXIT
AFM ELEMENT DATA
Summary: While editing AFM element parameters
other than EG, Output, Filter, or Effect, you can
copy data from an element of another voice to
the element you are now editing.

Operator on/off

AFM algorithm

(JUMP #231-#255)
(JUMP #234)

Copy element

Remarks: If you turn off all the carrier operators
there will be no sound.
This function is provided as a help in editing.
Operator on/off settings are not stored as part of
voice data.
When you select a different AFM or AWM
element or exit element editing, all operators
you turned off will be turned back on.
To return to the previous display, press EXIT.
Note: When you select an algorithm, all settings
which modify the routings in the algorithm
(feedback, input, etc.) will be cleared to their
initial settings.
Procedure:
From: AFM element job 1, 2, 6, or 7
Press: COPY
Press: F1 (Src) and select the source voice
Press: F2 (Elem) and select the source
element
To execute: the copy operation press F8 (Go)
VOICE EDIT MODE
JUMP #234
1 1 7