Realtime Recording - Yamaha SY77 Operating Manual

In realtime recording the notes you play will be recorded in the exact timing with which you play them.
Make settings for

realtime recording

Record the first track
Record additional tracks
42
Realtime recording
From the song play display press
(Real) to select realtime recording.
F1
If you have been following along with the previous pages of this section, the
various settings will be the same as you specified in Pattern recording. However
for realtime recording a track, you may wish to turn off quantization. Move the
cursor to Quantize and press –1 several times to select "off".
In song mode, the memory buttons 1-15 select the track to record. For this
example, press the select button 1 to make the track 1 LED light red. With the
default settings track 1 of the sequencer will transmit its data on channel 1.
Since in this example you have selected a piano voice for channel 1 of the multi,
you will hear the piano voice when you play the keyboard.
To begin recording press
measure countdown recording will begin. Play the keyboard. As you record, the
Measure display will advance to show the number of the measure currently
being recorded.
When you are finished recording the track, press
the song play display.
Press to return to measure 1, and press
recorded. Press to stop playback.
STOP
To record additional tracks,
l
press to return to measure 1
l l
press
RECORD
l
press a memory button 2-15 to select another track (LED lights red)
l
and press to record the track while listening to previously recorded
RUN
parts. Press
STOP
to enter song record mode and press
RECORD
. The LED will light red, and after a two-
RUN RUN
to stop playback.
. You will return to
STOP
to hear the track you just
RUN