Yamaha SY77 Operating Manual page 195

Each part in track 16 can be either a pattern
number, a begin repeat mark
repeat mark With the cursor located here,
specify the data that will occupy the selected
part. To specify a pattern press F1 (Ptn) and
specify the pattern number 01-99. To enter a
begin repeat mark press F2
repeat mark press F3
ber of times to repeat. When you press ENTER
to enter the specified data for each part, the part
number will automatically advance.
To search for the next occurrence of a begin
repeat, end repeat, or specified pattern number,
press F5 (Srch). Details are given below.
To copy a specified range of parts to another
range of parts, press F6 (Copy). Details are
given below.
To insert a new part into the track, press F7
(Ins). Details are given below.
To delete a specified part from the track, press
F8 (Del). Details are given below.
Repeat marks: The parts surrounded by repeat
begin and repeat end marks will repeat for the
specified number of times. For example, if track
16 consists of the following data, it will repeat
pattern 01 for 200 times.
Repeat marks can be nested if desired. For
example, the data in the diagram below will play
parts as follows: [05,12, 05, 12, 05, 12, 07] x 3.
Search: To search for the next occurrence of a begin
repeat, end repeat, or specified pattern number,
press F5 (Srch). The lower lines of the display
will change as follows.
or an end
To enter an end
and specify the num-
1. Specify the data you wish to search for. To
search for a specific pattern press F1 (Ptn) and
specify the number 1-99 for which you are
searching. To search for the next begin repeat
mark press F2
repeat mark press F3
2. Specify the direction in which you want to
search. Each time you press F4
will alternate between "forward" and
"backward".
3. To begin searching press ENTER. To cancel
without searching press EXIT.
Copy part: To copy a specified range of parts to
another range of parts, press F6 (Copy). The
lower lines of the display will change as follows.
1. Specify the copy source as "From Part" and "To
Part".
2. Specify the copy destination as "Destination
Part".
3. To copy the specified parts press ENTER. To
cancel without copying press EXIT. For example
if you have specified "From Part=002", "To
Part=003", and "Destination Part=005", the
contents of track 16 will change as follows.
SONG MODE
To search for the next end
the display
183