Awm Element Data; Awm Element Job Directory; Copy Element - Yamaha SY77 Operating Manual

VOICE EDIT MODE

AWM ELEMENT DATA

Summary: This directory shows the jobs which edit
AWM element data.
Procedure:
From: voice edit mode
When: editing a normal voice that contains
AWM elements
Select: an AWM element F3-F6
(E1-E4)
This area shows the number (E1-E4) and type
(AFM or AWM) of elements in the selected
voice mode.
Move the cursor in this area to select a job and
press ENTER to go to the selected job.
01:WaveSet (AWM waveform set): Select an
AWM sampled waveform from internal memory
or a WAVEFORM card, and specify the pitch at
which it will sound.
02:EG (AWM EG): The AWM Amplitude EG
determines how the volume of each note will
change over time.
AWM ELEMENT DATA
Summary: While editing any AWM parameter
(except for 7. AWM filter), you can copy data
from an AWM element of another voice into the
AWM element you are now editing.
138
AWM element data

AWM element job directory

(JUMP #200 or #201)
(JUMP #256)

Copy element

03:Output (AWM output): The output level of an
AWM element can be adjusted across the
keyboard.
04:Sensitv (AWM sensitivity): Key-on velocity can
affect the volume or the speed of attack and de-
cay. The control signal from the AWM LFO can
create vibrato, tremolo, or wah-wah.
05:LFO (AWM LFO): The AWM element LFO
creates a cyclically changing control signal that
can be used for tremolo, vibrato, or wah-wah.
06:PitchEG (AWM pitch EG): The pitch of each
note can be made to change in a fixed way over
time.
07:Filter (AWM filter): The tone of an AWM ele-
ment can be made to change in a fixed way over
time, or can be controlled by a controller or the
LFO.
15:lnitlz (Initialize AWM element): When you are
creating a voice from scratch, it is sometimes
convenient to set all AWM element data to the
basic or minimum values.
16:RecaIl (Recall voice): All data of the previously
edited voice can be recalled.
Procedure:
From: AWM element job 1,2,3,4,5,
Press: COPY
Press: Fl (Src) and select the source voice
Press: F2 (Elem) and select the source
element
To execute: the copy operation press F8 (Go).
JUMP #256
or 6