Set Up A Multi - Yamaha SY77 Operating Manual

When the SY77's tone generator is used in Multi mode, it will function as 16 independent synthesizers. This
allows each track of the sequencer to play a different sound.
Start with the initial multi
Select the voice for each
channel of the multi
36

Set up a multi

Since in this tutorial we will be creating a song with more than one track, we will
use the SY77's tone generator in multi mode so that it will function as 16 inde-
pendent synthesizers.
Press , then press
MULTI
the Initialize job.
Press . The display will show "Completed!". Press
+1/YES
Multi Edit job directory.
Press (01) to get the following display (or JUMP #401).
F1
Specify the voice that will be played by each channel 1-16 of the multi by moving
the cursor and using the
It is not possible for an Internal multi to use Card voices, nor is it possible for a
Card multi to use Internal voices.
In this example we will be assuming that you have selected the following
voices for channels 1-3 and 16. Select voices as desired for the other channels
of the multi.
Multi ch. no.
2
3
...
16
Press to return to the Multi Edit job directory.
EXIT
. While holding
EDIT
, and the memory select buttons 1-16.
MEMORY, BANK
Voice no. Voice name
Wood Bass
P1-A10
ChamberStr
P1-A11
P2-D15 Drum 1
press F7 (15) to select
SHIFT
to return to the
EXIT