Setting the Volume Slider
Since the volumes of the various voices differ, start with a setting in the middle of the
slider's range; adjust later to suit your taste, depending on the voice or voices being
played.
Volume Slider
Setting the Pan and Poly/Mono Buttons
Before you begin to play your new DX, make sure that the settings of the Pan and
Poly/Mono buttons are correct for your situation:
Poly/Mono
and Pan Buttons
To ensure that you are listening to the voices just as they were created,
make sure that this light is OFF. If it is ON, press the POLY/MONO button to
turn the light OFF. (The reasons for this will be explained later in this manual.)
If you are using stereo outputs or headphones,
make sure that this light is lit.
If it is not, press the PAN button to turn the light ON.
If you are using a single (mono} output,
make sure that this tight is not lit.
If it is, press the PAN button to turn the light OFF.
-5-
VOLUME