Yamaha SY77 Operating Manual page 63

Specify a filename
Save the data to disk
Select 03:Sequencer All, and press
If files containing Sequencer All data have already been saved on this disk, the
filenames will be displayed. Move the cursor in this area to select a disk file to
which you want to save your newly recorded song. For this example, select any
filename of "– NEW –*".
Press (Name). This allows you to give an eight character name to the file.
F7
Press (Clr) to clear the currently entered name. Then specify a filename, us-
F1
ing the numeric keypad to enter characters. Each time you press one of the
numeric keys, the LCD will cycle through the numeral printed on the numeric key
and the three alphabetical characters printed below it. Press
to upper-case characters. Press
After you have entered a name for the disk file press
the display will ask "Are you sure ?" If you are sure that you want to save the
data, press and the data will be saved to the specified disk file.
YES
Press any mode select button to leave this job.
to get the following display.
ENTER
(Lowr) to switch to lower-case characters.
F3
(GO). The bottom line of
F8
(Uppr) to switch
F2
51