Voice Select; Voice Directory - Yamaha SY77 Operating Manual

VOICE PLAY MODE
Press to enter voice play mode. The following
VOICE
LCD will appear.
VOICE This indicates that you are in Voice
Play mode.
Voice memory (I, C, P1, P2): This indicates the
voice memory; Internal, Card, Preset 1, or Preset
2.
Bank (A-D): This indicates the voice memory
bank.
Voice number in individual bank (1-16): This
indicates the number of the voice in the bank.
Voice number in banks A-D (1-64): This indi-
cates the voice as a number between 1 (voice 1
of bank A) to 64 (voice 16 of bank D).
Transmit channel (1-16): This indicates the
transmit channel you selected in MIDI Utility
1. Channel set (JUMP #807). The SY77 key-
board will transmit from MIDI OUT on this
channel.
Voice name: The voice name is displayed in
large characters.
Summary: This function allows you select voices
while viewing a directory of the sixteen voices in
the currently selected voice bank.
Procedure:
From: voice play mode
Select: (Dir)
F8
Specify: one of the displayed voices
To quit: and return to the voice play display
press
EXIT.
84

Voice select

To select a voice use the following procedure. The
voice will not actually change until you specify the
voice number 1-16. If you want to play a different
voice in the same bank, simply specify a different
number 1-16.
1. Select the voice memory;
2. Select a bank A, B, C, or D. The selected LED
3. Select a voice 1-16. The selected LED will light,

Voice directory

(JUMP #100)
(JUMP #101)
Voice mode: This indicates the type and number
of elements used by this voice. For details refer
to Voice Edit mode, Voice Mode Select.
Effect settings: This area indicates the effect
mode (off, 1-3) and type of effect selected by
this voice for each of the four DSP units; Modu-
lation 1 and 2, and Reverb 1 and 2. For details
refer to Voice Edit mode, Common Data job
10. Effect set.
Refer to the following section Send program
change.
Refer to the following section Voice directory.
Refer to the following section Controller view.
if a card is inserted into the
, or . The selected LED will blink.
1 PRESET 2
will blink.
and the LCD display will show the newly
selected voice name.
The first seven characters of each ten-character
voice name will be displayed. When you select a
different voice memory (internal, card, preset 1,
or preset 2) and voice bank (A-D) the sixteen
voices in the newly selected bank will be dis-
played. In addition to the usual methods of
selecting a voice, you can also use the arrow
keys to select a voice. When the voice directory
is displayed, pressing a memory select button or
bank select button will immediately select a
voice.
JUMP #100
(only
INTERNAL, CARD
slot),
DATA PRESET
JUMP #101