Song Edit (Data Change) - Yamaha SY77 Operating Manual

SONG MODE
Measure (001...999):
sure that is displayed. You can move the cursor
here and select another measure, or use the
sequencer location keys
You can use the dial, -1 +1, or the slider to move
within the step area in 32nd note steps by plac-
ing the cursor here. As you come to note data, it
will be displayed on the keyboard diagram below
and sounded on the synthesizer.
If the currently selected 32nd note step contains
note data, the notes will be displayed on this
keyboard diagram.
SONG EDIT
Summary: In song editing data change mode, all
data in the selected track 1-15 will be displayed
numerically. You can change the values of exist-
ing data, or delete the currently displayed data.
Procedure:
From: song mode when the SONG LED is lit
red
Press: EDIT
Select: a-track 1-15
Press: F8 (Data) and then press F2 (Chng).
Select: the data you wish to edit
Specify: the data parameters and location.
To change: the data press ENTER
To exit: song edit mode and return to song play
mode press EXIT.
Song Name: This displays the name of the song.
Measure (001...999): To move to another mea-
sure in the track, place the cursor here and
modify the data.
Time (01-08/4, 01-16/08, 01-32/16): This dis-
plays the time signature of the current measure
in the track.
Tempo is only displayed, and has no effect in
song edit mode.
Used (0...100%): This displays the amount of
sequencer memory already used.
180
This indicates the mea-
LOCATE, or

Song edit (data change)

Select the track to view: While in song edit graph
mode you can press a memory select button 1-
15 to select the track to view. If you select track
16 the display will be as explained in the follow-
ing section. Chain pattern.
Remarks: Graph edit mode only displays the data
in the track. To edit data you must use either
data change mode or data insert mode.
When the cursor is located in this area you can
use -l +l or the dial to move backwards and
forwards through the data in time. If the current
measure is longer than four quarter notes (e.g., a
time signature of 10/8), a number will be dis-
played here to indicate the section of the mea-
sure now being displayed.
The horizontal line represents one measure, and
vertical divisions represent one beat. A dot will
be displayed on. the bar to indicate a 32nd note
area which contains data.
As you move backward or forward through the
data in time, an arrow pointing downward will
move in 32nd note steps to indicate the current
position in the measure.
This area numerically shows the data at the
cursor location. Move the cursor to the data you
wish to modify, modify the data, and press
ENTER.
To delete the currently displayed data press F3
(Del).
To move to Insert mode press F1 (Ins).
Move through the data: As mentioned above,
when the cursor is located at
+1 or the dial to move backwards and forwards
through the data. You can also move through the
data regardless of the location of the cursor by
holding SHIFT and using -l +l or the dial.
Change the location of the data: In addition to the
data values for each type of data, you can also
modify the location (measure, beat, clock) to
move the data in time.
you can use -1