Pan Name; Output Group Select; Random Pitch - Yamaha SY99 Owner's Manual

Hide thumbs Also See for SY99:
Table of Contents

Advertisement

COMMON DATA / ELEMENT DYNAMIC PAN
Summary: Specify a ten-character name for the in-
ternal Pan data memory being edited.
Procedure:
From: Dynamic Pan Edit job directory
Select: 03:Pan Name
Specify: a name for the pan memory
COMMON DATA
Summary: Specify the output group for each ele-
ment.
Procedure:
From: voice common job directory (JUMP #201)
Select: job 07:OutSel
Specify: the output group for each element
Element 1—4 (off, grp1, grp2, both): Each of the
elements in a voice must be assigned to one or
both output groups. The element is then panned
COMMON DATA
Summary: Specify the amount of random pitch varia-
tion for the voice.
Procedure:
From: voice common job directory (JUMP #201)
Select: job 08:Random
Specify: the amount of random pitch variation

6.3 Pan name

7. Output group select

(JUMP #208)

8. Random pitch

(JUMP #209)
Enter a ten-character name for the Pan data.
To clear the currently entered name press F1
(Clr).
To switch to upper-case characters press F2
(Uppr).
To switch to lower-case characters press F3
(Lowr).
Methods of entering character data are ex-
plained in How to enter character data, on page
30.
as specified by the dynamic pan table, and the
stereo signal is sent to the corresponding output
channel.
The wet:dry setting determines the mix between
the effect processed sound from each effect unit
and the stereo signal from the dynamic pan
tables. If the wet:dry setting is 100:0, the stereo
pan will have no effect, since all the output
sound will be coming from the effect unit. If the
wet:dry setting is 0:100, the sound from the
effect unit will not be heard. Refer to the figure in
10.Effect set, page 104.
If you turn off the output group select for an
element, that element will not be sent to the
effect unit.
VOICE EDIT MODE
JUMP #208
JUMP #209
103

Advertisement

Table of Contents
loading

Table of Contents