Copy Pattern; Pattern Edit Jobs - Yamaha SY77 Operating Manual

PATTERN MODE
Summary: Pattern edit jobs allow you to copy a pat-
tern to another pattern, copy data from a track
into a pattern, copy data from a pattern into a
track, or copy the pattern data of all parts into a
track.
Procedure:
From: the pattern play or pattern record display
Press: F6 (Job).

PATTERN EDIT JOBS

Summary: This operation copies a pattern to
another pattern. This is useful when you want to
create a new pattern that is similar to an already
existing pattern.
Procedure:
From: the pattern edit job
directory
Select: 01:Copy Pattern
Specify: the Source pattern and the Destination
pattern.
To execute: the operation press ENTER.
To quit: without executing press EXIT.
210
Pattern edit jobs

1. Copy pattern

(JUMP #700)
Example: For settings of Source = pattern 3, Desti-
(JUMP #701)
Move the cursor in this area and press ENTER to
select the specified job.
Pressing F1-F4 will select the corresponding job
1-4.
01: Copy Pattern: Copy a pattern to another
pattern.
02: Get Pattern: Copy data from specified mea-
sures of a track into a pattern.
03: Put Pattern: Copy data from a pattern into
specified measures of a track.
04: Put Chain Pattern: Copy the pattern data of
all parts into a specified track 1-15.
Source pattern (01...99): Specify the pattern you
wish to copy.
Destination pattern (01...99): Specify the pat-
tern into which you wish to copy the source
pattern. The previous data in the destination
pattern will be lost.
nation = pattern 5, the result would be as
follows.
Before
Measure
Pattern 3
Pattern 5
JUMP #700
JUMP #701
After
Measure
Pattern 3
Pattern 5