Yamaha SY77 Operating Manual page 21

Prepare for recording
Record the first track
Record additional tracks
4. Press The
SONG. SONG
appear.
5. Press to get the following display.
RECORD
6. Press a track select button to select the track you wish to record. With the
default settings, the tracks of the sequencer will transmit on the channel of
the corresponding number, and will be played by the corresponding channel
of the multi you have selected. For example if you have selected Multi
1. POP and wish to record the Pick Bass part, press 1. If you select a channel
for which the multi does not use a voice, there will be no sound.
7. Press . After a two-measure countdown, recording will begin. Play
PLAY
along with the metronome to record the part. When you are finished, press
. Press to return to measure 1.
STOP
8. As desired, repeat steps 6 and 7 to select and record additional tracks.
Note:
A more complete explanation of using the SY77 sequencer is given in the
following section How to use the sequencer, which explains how to set up your
own Multi, create rhythm patterns, arrange the rhythm patterns in track 16
(the pattern track), record additional tracks, edit the song, and save the
finished song to disk. Refer to page 33.
LED will light red and the following display will
9