Maintenance And Inspection Precautions; Labels; Stp Pump Installation Warning Label; Hot Surface Warning Label - Edwards STP Series Instruction Manual

1.5

Maintenance and inspection precautions

Perform any maintenance or inspection of the STP pump, following Section 6, "MAINTENANCE AND
INSPECTION".
1.6

Labels

The following labels are affixed to the STP pump. Read the contents of the labels before operation.

1. STP pump installation warning label

This label describes installation of the STP pump. Install the STP pump according to the
precautions. Install the STP pump according to the precautions of Section 2, "INSTALLATION
OF THE STP PUMP".

2. Hot surface warning label

This label instructs operators so as not to touch the hot surface of the STP pump and the TMS
unit.
The TMS unit specification may lead to a considerable rise in temperatures outside the STP
pump. (only with TMS unit)
March 10
STP Series Turbomolecular Pump
Figure 1 - STP pump installation warning label
Figure 2 - Hot surface warning label
5
1
Issue 1-b