Table of Contents
Advertisement
1.5
Maintenance and inspection precautions
Perform any maintenance or inspection of the STP pump under the condition that no power is
applied to the STP pump (refer to SEMI S2 Section 13.2 - type 1), following Section 6,
"MAINTENANCE AND INSPECTION".
1.6
Labels
The following labels are affixed to the STP pump. Read the contents of the labels before operation.
1. STP pump installation warning label
This label describes installation of the STP pump. Install the STP pump according to the
precautions. Install the STP pump according to the precautions of Section 2, "IINSTALLATION
OF THE STP PUMP".
2. Hot surface warning label
This label instructs operators so as not to touch the hot surface of the STP pump and the TMS
unit.
The TMS unit specification may lead to a considerable rise in temperatures outside the STP
pump. (only with TMS unit)
STP Series Turbomolecular Pump
Figure 1 - STP pump installation warning label
Figure 2 - Hot surface warning label
1
MT-00E-001-M
Page 5
Advertisement
Table of Contents
