Tray Lock And Positioning - Ricoh FT7770 Service Manual

30
April, '89

7. Tray Lock and Positioning

When the tray starts moving up, the lock lever drops behind a lock plate
on the accuride support bracket, locking the tray in position to prevent the
tray from being pulled out while in the up position.
When the tray moves to the down position, the bottom plate of the tray
pushes down a pin on the lock lever. The opposite end of the lever then
moves up, allowing the tray to be pulled out.
When the tray is set, it is positioned by the detent arm. The roller of the
detent arm presses against the detent plate. The tray stopper is fixed to
the front right side of the tray and determines the side registration.
8-10