Led Table; Dip Switch Table - Ricoh FT7770 Service Manual

30
April, '89

3. LED Table

Number
LED101
LED102
LED103
LED104
LED105
LED106
LED107
LED108
LED109
Function
Exit Sensor ON
Inverter Entrance Sensor ON
Inverter Registration Sensor ON
Not Used
Registration Sensor ON
Feed-in Sensor ON
Indicates status of the size sensors.
Indicates status of the right feed hole sensor.
Motor (feed-in, belt, or inverter) speed too high.
(Refer to the DIP Switch Table. )
Indicates status of the size sensors
Indicates status of the left feed
Motor (Feed-in, Belt, or lnverter) Speed is correct
(Refer to the
DIP
Checks the size sensor.
Motor (Feed-in, Belt, or Inverter) Speed is low
(Refer to DIP Switch Table.)
lights)
(LED
Switch Table.)
7-34
hole sensor.