Jam Sensor And Bin Copy Sensor Adjustment - Ricoh FT7770 Service Manual

30
April, '89

9. Jam Sensor and Bin Copy Sensor Adjustment

Note: After replacing the main board, the following adjustment must be performed.
1. Turn off the main switch, then remove the rear cover (4 screws) and all
paper from the bin.
2. Turn on DIP SW 100-6 [A] on the sorter stapler main board and turn on
the main switch.
3. Adjust each of the following VRs so that the corresponding LED turns off.
Sensor
Upper Jam Sensor
Upper Bin Sensor
Lower Jam Sensor
Lower Bin Sensor
VR
VR100
VR101
VR102
VR103
11-44
LED
LEDl00
LED101
LED102
LED103