30
April, '89
18. Route the short end of the scanner drive wire [A] over the pulleys in
the following order.
NOTE: Use the wire clamps [B] to prevent the wire from slipping off the pulleys.
(1) Lower track clockwise.
(2) Inner track clockwise.
(3) Counterclockwise.
(4) (Skip the tension pulley.)
(5) Counterclockwise.
(6) Outer track counterclockwise.
(7) Lower track clockwise.
(2nd scanner drive pulley)
(Rear mirror shift pulley)
(2nd scanner drive pulley)
5-10