Table of Contents
Advertisement
KEY COUNTER HOLDER INSTALLATION
1.
Remove the upper front cover (2 screws).
2.
Remove the cover plate [A] and fixing plate [B] from the main switch
bracket (2 screws).
3.
Hold the fixing plate on the inside of the key counter holder and insert
the key counter holder [C].
4.
Align the screw holes in the fixing plate with the mounting holes of the
key counter holder and secure the key counter holder.
NOTE: This copier can use three types of counters. Make sure to use the
correct screw holes in the fixing plate.
Remove the shorting connector [D] from the key counter connector.
5.
6.
Connect the key counter holder.
Reassemble the copier and check key counter operation.
7.
3-15
30 April, '89
Advertisement
Chapters
Table of Contents
