Second Sorter/Stapler Preparation - Ricoh FT7770 Service Manual

1 August 1990

5.2.2 Second Sorter/Stapler Preparation

25. Remove the front left cover [A] (4 screws), two screws [B], and just
loosen a screw [B'].
26. Fix the front left shield cover bracket [C] to the sorter/stapler frame.
27. Reinstall the front left cover [A], and install the left shield cover [D] on the
sorter/stapler.
28. Remove the rear cover to replace the EPROM on the second
Sorter/Stapler main PCB with the EPROM which comes in the accessory
box.
14-12