Ricoh FT7770 Service Manual page 23

C o p i e r
No. Name
1. Main Switch
2. Control Panel
3. Exposure Glass
Left Door
4.
Right Door
5.
Paper Trays
6.
Key Counter Port
7.
8. Original Guide
Plate
9. Original
Feed-in Unit
10. DF Indicator Panel
11. Belt Unit
12. Reverse Section
13. Original Tray
14. Computer Form Fence
15. Feed Stopper
Edge Guides
16.
17. Computer Form Guide
18.
Stacker
Menu Reader
27.
28. Access Cover
Function
Turns the machine on or off.
Operator controls and indicators for the main copier and
sorter are located here.
Place originals here for copying.
Provides access for supplying toner and removing
misfeeds.
Provides access for removing misfeeds.
The two trays hold up to 1,500 sheets of paper — 1,000 in
the upper tray and 500 in the lower tray.
Insert the key counter (option) here.
Place originals here for automatic or semi-automatic
feeding.
Separates originals and feeds them to the belt unit.
Document feeder indicators are located here.
Automatically transports and positions original docu-
ments. (Place book originals directly on the exposure
glass.)
Turns over the originals for automatic copying of the
reverse side.
Originals are stacked here after copying.
Keeps a stack of computer forms straight so that they
will feed smoothly.
Prevents originals from being inserted while copying
computer forms.
Keep computer forms straight as they are fed into the
document feeder.
Sends computer forms to the stacker.
Receives computer forms after copying.
Reads job sheets and sets operation modes automati-
cally.
Provides access for removing misfeeds.
1-5
30 April, '89