Table of Contents
Advertisement
30
April, '89
DUPLEX
1. Duplex Tray Removal
1.
Open the front doors and the top unit.
2.
Slide out the fusing unit and remove the transfer
cover (2 screws).
3.
Remove the fusing unit cover (3 screws), and reset
Pull the duplex tray all the way out. Remove the the duplex tray handle
4.
[A] (1 screw) and the duplex tray cover [B] (2 screws).
5.
Remove two screws [C] and one flat head screw [D].
6.
Lift the front right side of the duplex tray to release the duplex tray from
the accuride rail, and pull the duplex tray out about 50 mm (2 inches).
7.
Grasp the right side of the duplex tray and support shaft [E].
Swing up the duplex tray in a counterclockwise direction and remove the
8.
duplex tray.
5-66
and transport unit
the fusing unit.
Advertisement
Chapters
Table of Contents
