30
April, '89
3. Cleaning Blade, Metering Blade, and Oil Supply Pad Replacement
1.
Remove the fusing left cover.
ment".)
Disconnect the oil tube [A] and remove the the oil supply unit [B] (2 Al-
2.
len screws).
3.
Unhook the pressure springs [C], rotate the cleaning blade assembly
to the vertical position, and remove it.
4.
Remove the oil supply pad assembly [E] (2 screws).
5.
Unhook the pressure springs [F]; rotate the metering blade assembly
to the vertical position, and remove it.
(Refer to "Hot Roller Stripper Replace-
5-44
[D]
[G]