Table of Contents
Advertisement
4 GUI (Graphic User Interface) Operation
Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the rear panel and then boot up the device to view the analog video output. You can use
the mouse to implement some GUI operation.
4.1 Login
After the device boots up, the system is in the multiple-channel display mode. See Figure
4-1.Please note the displayed window amount may vary. The following figure is for reference only.
You can use USB2.0 mouse to input. Click
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
3 failed login attempts within 30mins will result in triggering the system alarm and after 5 failed
attempts, also within 30mins, will result in account loss.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-1
to switch between numeral, English character
Figure 4-2
8
Advertisement
Table of Contents
