Pre-Installation Requirements - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

Installing the BlackDiamond 8800 Series Chassis
NOTE
Save all packaging, bolts, washers, and clip locks, as well as the box and pallet, for future use in the event that the
chassis must be moved to another location or returned to Extreme Networks.
Verify that the following items are included in the shipping carton:
BlackDiamond 8810 chassis with eight installed blank front panels
●
Power cord retainer
●
19-inch support bracket
●
BlackDiamond documentation pack with ESD-preventive wrist strap
●
NOTE
Save all packaging, clip locks, and box pieces for future use in the event that the BlackDiamond 8810 chassis must
be moved to another location or returned to Extreme Networks, Inc.

Pre-installation Requirements

The following tools, equipment, and resources are required for installing the BlackDiamond 8800 series
chassis:
ESD-preventive wrist strap (provided)
●
19-inch support bracket (provided)
●
For installing the chassis in a mid-mount position in the rack:
●
Optional BlackDiamond 8806 mid-mount kit, part number 65046. Order this kit separately from
■
the chassis.
or
Optional BlackDiamond 8810 mid-mount kit, Model 41141. Order this kit separately from the
■
chassis.
#2 Phillips screwdriver
■
Rack-mount screws appropriate for your organization's rack system, as follows:
●
4 screws to attach the support bracket
■
12 screws to secure the chassis in the rack
■
The screw size will vary based on your organization's rack system; screws are not provided.
Screwdriver appropriate for the rack-mounting screws you will use
●
The screwdriver size will vary based on the requirements of your organization's rack system.
88
BlackDiamond 8800 Series Switches Hardware Installation Guide