Table of Contents
Advertisement
This manual will be updated as required. You can find the current version of the manual on the Internet at
Guide
To help you quickly find the information you need, this manual contains the following aids:
A complete table of contents as well as a list of all figures and tables in the manual are provided at the
o
beginning of the manual.
A glossary containing definitions of important terms used in the manual is located following the appendices.
o
References to other documents are indicated by the document reference number enclosed in slashes (/No./).
o
The complete title of the document can be obtained from the list of references at the end of the manual.
Additional Support
If you have questions regarding use of the described block that are not addressed in the documentation, please
contact your Siemens representative.
Please send your written questions, comments, and suggestions regarding the manual to the hotline via the e-
mail address indicated above.
In addition, you can receive general information, current product information, FAQs, and downloads pertaining to
your application on the Internet at:
Technical Contacts for Germany / Worldwide
Siemens AG
Automation & Drives
ComDeC
Street address:
Würzburgerstr.121
90766 Fürth
Federal Republic of Germany
Technical Contacts for USA
PROFI Interface Center:
One Internet Plaza
PO Box 4991
Johnson City, TN 37602-4991
Copyright © Siemens AG 2010. All rights reserved.
Technical data subject to change
.
Phone: 0911/750-2736
Phone: 0911/750-2080
Fax:
0911/750-2100
E-mail: ComDeC@siemens.com
Mailing address:
P.O. Box 2355
90713 Fürth
Federal Republic of Germany
Fax:
(423)- 262- 2103
Phone:
(423)- 262- 2576
E-mail:
profibus.sea@siemens.com
Page 4
ERTEC 400 Manual
Version 1.2.2
Advertisement
Table of Contents
