Controlling The Volume; Using The Hands Free Feature - 3Com VCX Manual

Controlling the Volume

Using the Hands Free Feature

System Speed Dial — System speed dial numbers can be configured at the
telephone or through the VCX User Interface, which is accessed through the web
(see Chapter 7).
Advanced Settings — Configures network parameters, sets your telephone
password and changes your login status.
Network parameter options are for administrator use only. Unauthorized changes to
network parameters will disconnect your telephone.
Use the Volume Control buttons to raise or lower the volume of the ringer, handset, or
speaker.
Adjusting the volume control of one device DOES NOT affect the volume control of the
other devices. For example, lowering the volume of the speaker has no effect on the
handset volume. Changes you make to any device remain in effect if you reset the
telephone to its default settings.
Ringer Volume — To raise or lower the volume of the ring, press the up or down
Volume Control button repeatedly while your telephone is ringing, until the volume is at
the level that you prefer.
Handset Volume — To raise or lower the volume of the dial tone and the voice level of
your callers, lift the handset then press the up or down Volume Control buttons
repeatedly until the volume is at the level you prefer. You can change the volume during
a conversation or by listening to the dial tone.
Speaker Volume(3101SP Only) — To raise or lower the volume of the speaker, press
the Speaker button and then press the up or down Volume Control button repeatedly
until the volume is at the level you prefer. You can change the volume during a
conversation or by pressing Speaker and listening to the dial tone.
When you press a Volume Control button, the Display Panel shows the volume setting
as a series of dark vertical bars. Repeatedly pressing a Volume Control button raises
the volume (increases the number of displayed bars) or lowers the volume (decreases
the number of displayed bars.
You can also use Feature Codes to adjust the volume. Pressing Feature + 102 raises
the volume (increases the number of displayed bars by one). Pressing Feature + 103
lowers the volume (decreases the number of displayed bars by one).
You can use your telephone as an intercom. You can answer internal (intercom) calls
without picking up the handset. When you receive an internal call, your telephone
sounds a tone and activates the speaker phone.