Table of Contents
Advertisement
64
C
6: S
HAPTER
TANDARD
Transferring a Call
Directly to Voice
Mail
Call Waiting
Controlling the
Volume
F
EATURES
You can transfer incoming calls directly to voice mail by using the Fwd
Mail button.
1 Press Fwd Mail (Model 3102 Model 2102) or press Feature + 440
(Model 3101 and Model 2101). The red light next to the button comes
on. All future calls transfer automatically to voice mail.
2 If you have not used the Fwd Mail button to transfer your calls to voice
mail, you can transfer a call that is ringing by pressing Fwd Mail; only
that call is transferred to Voice Mail. Subsequent incoming calls are not
transferred.
3 To disable this feature, press Fwd Mail again or press Feature + 440. The
light goes out and now all calls ring normally.
The Call Waiting feature provides a "beep" on your current call to let you
know that another call has arrived on another access line.
1 When you hear the "beep", press the Hold button to put the current call
on hold.
2 Press the Access button for the incoming call. For Model 2101, press the
Toggle button.
3 To toggle between the two calls, put the current call on hold and then
press the Access button for the call you want. For Model 2101, press the
Toggle button.
Use the Volume Control buttons to raise or lower the volume of the
ringer, handset, and speaker.
Adjusting the volume control of one device DOES NOT affect the volume
control of the other devices. For example, lowering the volume of the
speaker has no effect on the handset volume. Changes you make to any
device remain in effect if you reset the phone to its default settings.
Ringer Volume — To raise or lower the volume of the ring, press the
up or down Volume Control buttons repeatedly until the volume is at
the level you prefer. Change your ringer volume while your telephone
is ringing by listening to the ring tone.
Handset Volume — To raise or lower the volume of the dial tone and
the voice level of your callers, lift the handset then press the up or
Advertisement
Table of Contents
