3Com VCX Manual page 85

Figure 6 Attaching the Support Bracket
Figure 7 Adjusting the Support Bracket
Figure 8 Wall Mounting a 3102 Telephone
To
bracket,
bracket into the mounting
supports 2, on the bottom
of the telephone. After you
connect the cables to the
phone, press the cables
into
management clamps 3, on
the stand.
To
bracket, press to release
the lock tab 1, rotate the
bracket to the position that
you want, and then release
the lock tab.
When you mount a 3101, 3101SP, 3102, or
3103 telephone on a wall, attach the support
bracket and adjust it so that the bottom of the
support bracket rests against the bottom
supports on the
mounting requires 3/4-inch drywall and 1.5-inch
drywall screws.
attach the support
1, snap
the cable
adjust the support
telephone, 1.Safe
the
wall